(989) 533-9793

Antenna Preamplifier for Better Reception

If the signal in your area is weak, purchase our antenna preamplifier to improve reception. We sell the Winegard LNA 200 TV Antenna Preamplifier-Booster, which is an ultra-low-noise preamplifier that delivers the ultimate digital TV picture and sound quality. You can also use our distribution amplifiers to strengthen the signal.

Mast-Mounted Boost XT LNA 200 Preamplifier Unit

The LNA 200 Preamplifier with TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance on any non-amplified outdoor antenna.
The Boost XT outdoor preamplifier works with any passive outdoor TV antenna and extends the signal range. What sets the Boost XT apart from other preamplifiers is that it has a true dual-path design with separate filtering and amplification paths for both frequencies. This design greatly enhances signal selectivity and reduces noise and interference to the lowest levels of any product in this category. We achieve this result thanks to our revolutionary Clear Circuit Technology™ and TwinAmp Technology™.
Product Information:
  • Price: $59.95
  • In Stock

Power Supply, Power Inserter, USB Cable, & Rubber Boots Included

This energy-saving USB power supply is built with an LED power indicator and powered through a coax connection. No additional electrical wiring is required.
Specifications:
  • Gain: 20 dB L-VHF, 15 dB H-VHF, 16.5 dB UHF
  • Noise Figure: 3 dB VHF, 1 dB UHF
  • Power: USB +5 Volts at 130mA
  • Includes: Preamplifier, USB Power Cable, 110V Adapter, Power Inserter, & Weather Boots
  • Gain: 18 dB
  • Ultra-Low-Noise Figure: 1.0 dB (Typical)
  • Power: +5 Volt

How Preamplifiers are Powered

Q. “Denny - Your TV antenna mast mount pre-amplifiers --- How are preamplifier’s powered ? --- I don’t see any easy way to get 120VAC up to an antenna if they are AC powered. Thanks, Paul”
A. TV antenna preamplifiers are two-part units: the mast-mounted preamplifier and the indoor power injector. The power injector is located indoors and requires an electrical outlet. The coax cable down lead from the mast-mounted preamplifier feeds into and out of the indoor power injector. The power injector converts the 120V electricity to low-voltage DC, inserts it into the coax cable, and sends it up the cable to supply the preamplifier with operating power.
The mast-mounted preamplifier receives its power via the coax cable from the indoor power injector. Signal splitters should not be installed in line between the mast-mounted preamplifier.

contact us